Hydra-Lift Drum Carriers

Request A Quote


Morse 510
Manual Model

Easily handle a heavy drum with a Morse Hydra-Lift Karrier. Lift, move and control pouring of a 55-gallon drum weighing up to 800 Lb. with minimal effort. Handle a variety of drums by installing the correct accessories for your drum. Models with maximum pouring heights of 72” or 96”. You can raise and control dispensing as necessary. Increase pouring angle for full discharge, reduce to control the pour rate, or reverse to stop pouring and deliver partial drum contents.Material is poured forward straight from the drum with variable lift and pour angles. Faucets, pipe, valve extensions, etc. may be attached to the drum.Though most often used to lift and pour, the Hydra-Lift Karrier can also be used to lift drums on and off scales, platforms, conveyors or trucks, move drums to or from storage, or position drums of parts for hand access at work stations.

MorCinch

Drum Holder

Manually tighten the MORCINCH drum holder quickly and easily around your drum

360 degree rotation

360° Rotation

Continuously rotate your drums, end-over-end, 360° in either direction

Specifications


ModelDump
Height
Drum Cap. (lbs)StraddleTurning
Radius
LengthDrum
Sizes
Quote
Form
FullHalf-FullIDOD
400A-7272"80050037"44"72"60"22"-23.5"øQuote
400A-9696"80050042"49"84"72.5"22"-23.5"øQuote
410-7272"120060026.9"35.4"72"62.5"22"-23.5"øQuote
Model400A-72400A-96410-72
Dump Height72"96"72"
Cap. Full800 lbs800 lbs1200 lbs
Cap. 1/2 Full500 lbs500 lbs600 lbs
Straddle ID37"42"26.9"
Straddle OD44"49"35.4"
Turning Radius72"84"72"
Length60"72.5"62.5"
Drum Sizes22"-23.5"ø
Quote FormQuoteQuoteQuote

Standard Features


  • Lift, move and control dispensing of your drum up to 96"
  • You control the lifting height and pouring angle
  • Power Lift and Tilt Options
  • 360° Tilt Control in either direction
  • Models available with spark resistant parts
  • Automatically adjusts for 22” to 23.5” diameter drum
  • Accepts Diameter Adaptors for your smaller drum
  • Flexible cover on the cinch chain

Options


Rim Clamp

Rim Clamp

Bracket Assembly

Backet Assembly

Diameter Adapter

Diameter Adapter

Web strap

Web Strap

Tilt Brake

Tilt Brake

Tilt Brake

Spark Resistant Parts

3 Piece Holder

3 Piece Holder

Idler Attachment

FRL Kit for Air Motor

Copyright 2018
All Right Reserved
Solution Dynamics, Inc.
T: 877-860-3620
P: 262-521-5730
F: 262-521-5733
GSA Logo
MHI Member
MHEDA Member
Solution Dynamics, Inc BBB Business Review